SWP-C10 Temperature Gauge
Contact Info
- Add:广州市海珠区, Zip: 510000
- Contact: 黄经理
- Tel:13751769078
- Email:1791149554@qq.com
Other Products
SWP-C10 Temperature Meter
Brand: Changhui
Instrument Size: 48*48*110mm
Cutout Size: 44*44mm
Place of Production: Fuzhou, Fujian
Shipping From: Guangzhou, Guangdong
Delivery Time: 5 working days
Product Overview
The SWP-LED series single-loop digital/light bar display control instrument uses a microprocessor for control operations, enabling highly precise linear correction measurements for various nonlinear input signals. This instrument integrates digital and analog meters, providing digital display control (high-brightness LED digital display) and relative analog display (light bar display) for measurement signals such as temperature, pressure, liquid level, and speed, making the display of measured values clearer and more intuitive. It also supports dual light bar display mode.
Technical Parameters
|
Specification |
Description |
|
|
Operating Environment |
Ambient Temperature |
0~50℃ |
|
Relative Humidity |
≤85RH Avoid strong corrosive gases |
|
|
Power Supply Voltage |
Standard Type AC220V+10-15%（50Hz±2Hz） Special Type AC85~260V——Switching Power Supply DC24V ±2V——Switching Power Supply |
|
|
Power Consumption |
·≤6W（AC220V Linear Power Supply） ·≤6W（AC85~260V Switching Power Supply） ·≤6W（DC24V Switching Power Supply） |
|
|
Input Signal |
Analog |
Thermocouple: Standard Thermocouples——B, S, K, E, J, T, WRe3-25, etc. |
|
Resistance: Standard Thermal Resistors——Pt10, Pt100.1, Cu50, Cu100, etc., Remote Pressure Resistors, etc. |
||
|
Current: 0~10mA, 4~20mA, 0~20mA, etc.——Input Impedance ≤250Ω |
||
|
Voltage: 0~5V, 1~5V, mV, etc.——Input Impedance ≥250KΩ |
||
|
Digital |
Pulse Signal: Waveform——Rectangular, Sine, or Triangular Wave Amplitude——Greater than 4V (or as specified by the user) Range——0~10KHz (or as specified by the user) |
|
|
Contact Signal: Electrical Contact Input Signal |
||
|
Output Signal |
Analog Output |
DC 0~10mA（Load Resistance ≤750Ω）DC 4~20mA（Load Resistance ≤500Ω） DC 0~5V（Load Resistance ≥250KΩ） DC 1~5V（Load Resistance ≥250KΩ） |
|
Digital Output |
Relay Control Output - Relay ON/OFF with Hysteresis. AC 220V/3A DC 24V/5A (Resistive Load) Thyristor Control Output - SCR (Thyristor Zero-Cross Trigger Pulse) Output, 0.5A/400V Solid State Relay Output - SSR (Solid State Relay Control Signal) Output, 6~24V/30mA (Voltage Non-Adjustable) Bidirectional Thyristor Output - SOT Thyristor Output, 5A/400V |
|
|
Communication Output |
Interface——Standard Serial Bidirectional Communication Interface RS-485, RS-232 C, RS-422, etc. Baud Rate——300~9600bps Internally Set by the Instrument |
|
|
Power Supply Output |
DC 24V Load ≤30mA |
|
|
Measurement Accuracy |
±0.2%FS±1 digit or ±0.5%FS±1 digit |
|
|
Resolution |
±1 digit |
|
|
Measurement Range |
-1999~9999 digits |
|
|
Display Mode |
-1999~9999 digits measured value display -1999~9999 digits set value display LED working status display |
|
|
Mode |
Control/Alarm mode with hysteresis upper or lower limit alarm (freely settable) |
|
|
Control Accuracy |
±1 digit |
|
|
Temperature Compensation |
0~50℃ digital automatic temperature compensation |
|
|
Print Control |
Can be directly connected to various serial printers (e.g., LQ-300K, TPuP series micro printers, etc.), print interface is RS-232C |
|
|
Print Accuracy |
Same as instrument accuracy |
|
|
Parameter Setting |
Panel touch key setting, parameter settings permanently saved after power off, parameter settings password locked |
|
|
Protection Mode |
Input circuit break alarm (when thermocouple or resistance input), relay output status LED indication, input over/under range alarm, Power undervoltage automatic reset, abnormal operation automatic reset (Watch Dog) |
|
| Industry Category | Measurement-Analysis-Instruments |
|---|---|
| Product Category | |
| Brand: | 昌晖 |
| Spec: | SWP-C10 |
| Stock: | |
| Origin: | China / Guangdong / Guangzhoushi |
